MAGSARUS IGNITIONS

Phone Icon (518) 452-0430

Monday - Friday: 8:00 AM - 8:00 PM

HEI Ignition Parts Distributor
in the Country


Part#500-0 is locked up steel gear, these dist are also used in 602 & 604 crate engines, Our H.E.I. WILL PERFORM AS GOOD AS A MSD 6 AL WITH OUT A BOX SAME HIGH RPM OUTPUT     9000 PLUS RPMS   900 PLUS H.P. DYNOS DONT LIE 

                           $ 389.50

NOTE:            SAME DIST WITH BRASS GEAR PART # 501-0  
                                              $ 398.00

HEI Ignition Parts Part#500-0

Part# 500-5 CHEVY STREET / STRIP WITH OR WITHOUT VACUME POT , SHORT ADVANCE CURVE FULL RACE PARTS SAME POWER RATING AS THE 500-0 DISTRIBUTOR

                                             $ 389.50

Part# 500-5

Part#503-0 Ford 351W SVO

THIS FORD DIST COMES LOCKED UP WITH A BRASS GEAR,   9000 PLUS RPMS  900H.P. RATING NO BOX REQUIRED. 
                                                $ 440.00

Part#503-0

Part#502-0 Chrysler 360 LOCKED UP.  9000 PLUS R.P.M.S.  900 PLUS H.P.

                                             $ 400.00

Part#502-0

Magsarus Ignitions high-performance racing HEI ignition parts distributors are redesigned for top racing experience. Our distributors have the strongest and highest RPM in the country, with the least amount of input voltage.With a low 11.8 Volts input to the distributor, our distributor will turn up 9000 RPMS with 50,000 Volts output available to the spark plugs, with A recommended .030"to .040" spark plug gap our distributors will handle any 900 H.P. ENG..

Test have shown that our RACING H.E,I. is + or - 2 H.P. on a back to back test against a M.S.D.6 AL ignition. Every piece of the distributor is subject to change and modification to out perform and outlast the competition. Unlike some performance distributors that are 0.E.M. with no modifications with high performance sticker on top, Magsarus hei dist 500-0 features include: rotor indexed and evenly spaced to the cap, our (drive spindle) is modified for in housing oil control. the top plate is tig welded to the main shaft to prevent breakage, Custom pick up coil, high output /high rpm main coil, high endurance module, custom wire harness, rotating trigger modification, very tight gear end play, slip collar if needed, Magsarus also provides a custom curves for street hot rods which use a Longer curve 500-10. our hei distributor with a short mechanical advance curve is part # 500-5. Engines in circle track racing where the rpms rapidly go up and down we strongly suggest getting the dist. LOCKED UP for quicker acceleration. PART # 500-0 OR THE 501-0. Magsarus dyno test every H.E.I. WE OVERHAUL / MODIFY A LOT OF 602 / 604 CRATE DISTRIBUTORS FOR RACING LET US KNOW ABOUT YOUR SPECIFIC RULES WE CAN GIVE YOU THE BEST H.E.I. IN THE WORLD. NO OIL MESS, QUICKER ACCELERATION OFF THE CORNER, MAGSARUS H.E.I. WILL NEVER LAY DOWN ON THE TOP END. Some of my professional engine builders claim about 7 to 9 H.P. gain with our distributor and wires. This dist. when done will handle a 900 HP ENGINE.

Don't be fooled by companies claiming more power than magnetos, and claiming to make a custom advance for your cam and motor combination its total B.S. //////MAGSARUS only addresses the problems and weaknesses. WE HAVE TESTED OUR DISTRIBUTORS TO OVER 10,500 RPMS. we supply many engine shops with our distributors all over north America. ///////MAGSARUS IS ALL ABOUT QUALITY OVER QUANITY. DYNO TESTED — RACER APPROVED

For questions and inquiries. Contact the legit HEI ignition parts distributors in the country, Magsarus Ignitions.